New For Dish 20.1 TV1 Dish Network TV DVD Satellite Learning IR Remote Control

Description: Be sure to add me to your favorites list!Check out my other items! New For Dish 20.1 TV1 Dish Network TV DVD Satellite Learning IR Remote Control Model Number: 20.1 Condition: New Brand: Dish Compatible Brand: For Dish Type: Dish Network Remote Channel: 1 Frequency: 433 MHz Material: ABS Material Colour: As Shown Weight: 0.10kg (0.22lb.) Quantity: 1 x remote control (requires 2 x AAA batteries,batteries are not included) Unit Type: piece Package: PP Bag Package Weight: 0.150kg (0.33lb.) Package Size: 28cm x 13.5cm x 0.5cm (11.02in x 5.31in x 0.2in) Remark: A replacement remote control units and will work as well as the originals. No programming or setup required. Supplied with TV models: VIP 622, 722, 222, 522, 625, 942, 201, 211, 301, 311, 322, 351, 1000, 2200, 2700, 2800, 2900, 3000, 3200, 3700, 3800, 3900, 4000, 4100, 9200, 5200, 6000. 6100 It requires 2 x AAA batteries,batteries are not included. it has no RF section. It can not be setup in SAT mode. If you have tried the remote control can't work, you can try to press TV device button long, the device lights up, enter the code 1005, and the device flashes two, then indicates that the setup is finished. Programming to Control Dish Receiver Although your remote may already be configured to work with your DISH receiver, there's a chance that you may need to program it. To test whether this is necessary, press the POWER button on the receiver to turn it on, and follow this up by turning on your HDTV or other television. Press the GUIDE button on your remote, and if the programming guide pops up, you can skip to "Programming 20.1 IR Remote for Other Devices." If the guide doesn't show up, press the SYSTEM INFO button that's located on your DISH receiver once. This will bring up the System Info screen. On your remote, press the SAT button, which should illuminate the SAT light. Press the RECORD button once. This will again cause the SAT button to light up. After releasing the RECORD button, press the SELECT button, located on the front of your receiver, to exit out of the System Info screen. Once this is done, point the remote at the television where it will be used. Press the GUIDE button on your 20.1 IR remote once, and this should bring up the programming guide to show everything has gone smoothly. Programming 20.1 IR Remote for Other Devices Once you're sure your DISH receiver and 20.1 IR remote are connected properly, programming the remote to your DVD player or other device is a cinch. While facing the device that you need to program, press the button that corresponds to the device you're programming (TV, DVD, AUX, etc). Hold the button down until all four mode buttons light up. You will now need to enter the three-digit manufacturer code that correlates with the device you're programming. Unfortunately, these codes can vary immensely. A code for a home stereo system and television from the same manufacturer, for instance, will not be the same. Luckily, DISH has remote control codes readily available and easily searchable on their website. After entering the three-digit code, the mode button you're programming will light up. Press the POUND (#) button once. This should cause the specific mode button to blink three times. Your device should now be configured. Test this by pressing the VOLUME, PLAY, or other buttons related to the device. Dear friends, thank you for coming to my shop. Our shop sell remote control has two kinds, one is the original remote control . Function is your original exactly the same. Another is a universal remote control. He basically can replace the original remote control functions. But there may be Very few of button are not the same. Please think carefully before you buy. If you mind this. Please find the original remote control. 1. Because China Postal Airlines packet can not send the battery, so we sell all the remote control is not contained inside the battery. 2. All products are packed with care. For fragile items, outer protect with bubble paper. 1. Recommended to use direct online payment. 2. Full payment must be made within 7 days after placing your order, or the order will be invalid or canceled by the system. 3. Make sure that you have completed all the detailed information like contact person,address,post code and telephone number when filling in your buyer's information. 4.if you want to declare the goods as other item name, or specify an value for custom, please inform us when making the order. Welcome to all friends to visit my store, My store have a professional team service. My store goal is "Professional, Quality, Trustworthy". My store provided the best cost-effective products and quality service to everyone.Welcome to Wei Feng Electronic Technology limited On May 27, 2023 at 05:21:30 PDT, seller added the following information:

Price: 10.13 USD

Location: Perth Amboy, New Jersey

End Time: 2023-11-09T07:05:32.000Z

Shipping Cost: 0 USD