FRICTION Loss in Pipes Apparatus - Fluid Mechanics Lab Experimental Setup

Description: Product Description: The setup consists of 2 pipes of different diameters, which are connected in parallel. Pressure tapings are provided on each pipe to measure the pressure losses with the help of a Differential Manometer. Control valves are fitted on each pipe, which enables to use one pipe at a time for experiment. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of is measured with the help of measuring tank and stop watch Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 To determine the losses due to fiction in pipes.To determine the friction factor for Darcy-Weisbach equation Utilities Required: Electricity supply: Single Phase, 220 V AC, 50 Hz, 5-15 amp combined socket with earth connection. Earth voltage should be less than 5 volts. Water Supply: Initial fill Floor Drain. Floor Area 1.5 x 0.75 m. Technical Details: Pipe Test Section : (i) Día ½”, Length: 1m, Material G.I. (ii) Día ¾”, Length: 1m, Material G.I. Water Circulation : ½ HP Pump, Crompton make. Flow Measurement : Using Measuring Tank with Piezometer, Capacity 25 Liters. Sump Tank : Capacity 50 Liters. Stop Watch : Electronic. Control Panel Comprises of : Standard make On/Off Switch, Mains Indicator, etc. Tanks will be made of Stainless Steel. An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint. *Note: All the custom duty/taxes to be paid by the buyer

Price: 1414.96 USD

Location: AMBALA, HARYANA

End Time: 2024-10-29T19:03:08.000Z

Shipping Cost: 0 USD